Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Cleaners & Disinfectants » Descaling Chemicals » Sulphamic Acid Descaler

Sulphamic Acid Descaler

Chemtex's sulphamic acid descaler is an efficient descaling agent and is used for cleaning of a variety of industrial equipments and domestic appliances. Chemtex's sulphamic acid descaler can be used for removing water and process scales from industrial equipments. Broadly these find use in the chemical and fertilizer industry, dairy and food equipments, brewery equipment, marine equipment, sugar industry etc. The products which we cater under Sulphamic Acid Descaler are Inhibited Sulphamic Acid, Inhibitor for Sulphamic Acid, Sulphamic acid GP Grade, Sulphamic acid Descaler.

Thses formulations are non-inflammable and, unlike hydrochloric acid, does not give off obnoxious fumes. The safety of Chemtex's sulphamic acid descaler has been further increased by the addition of corrosion inhibitors and other chemicals to make Chemtex's sulphamic acid descaler a versatile descaling agent which is safer still in terms of equipment corrosion and safety of personnel. The field of descaling is wide and the exact application of Chemtex's sulphamic acid descaler can only be determined after considering the nature and extent of scaling, and the type of equipment that is to be descaled.





Inhibited Sulfamic Acid

Sulfamic Acid Combined With Corrosion Inhibitor And Wetting Agent, To Provide Corrosion Protection To Metal During Descaling And Giving Optimum Cleaning of Water Side of Heat Exchangers And Boilers.

It Also Aids In Removal of Loose Corrosion Products, Organic Foulants, Dirt, Clay And Silt Deposits. It Is Used For Descaling of High And Low Pressure Boilers, Heat Exchangers Etc., And Is Safe For Aluminum, Stainless Steel, Carbon Steel, Mild Steel, Cast Iron, Brass, Admiralty Metal, Titanium, Copper And Copper Alloys, Pvc Plastic, Rubber Or Leather When Used As Directed.

Key Features and Benefits

Application and Dosage
It Is A Non-Inflammable And Biodegradable Chemical Compound And Does Not Give off Obnoxious Fumes. The Method of Using CHEMTEX'S Inhibited Sulfamic Acid Is Very Simple And Basic.

Prepare A Solution of 5-10% W/W of CHEMTEX'S Inhibited Sulfamic Acid In Preheated Water (preferably) At 70-80oc. The Descalant Solution Should Be Prepared About 20% In Excess of The System Hold Up Volume. Re-Circulate The Solution Using An Acid Compatible Pump. After Descaling Is Completed, Flush Out The Solution And Rinse Once With Plain Water. Neutralize The System With 2% W/W Alstherm C334 In Water And Recirculate For An Hour. Flush Out The Solution And Return System To Normal Service.

Handling Measures and Precautions
Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.

Storage
This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

Packing
CHEMTEX'S Inhibited Sulfamic Acid Is Available In 50kgs Bags.







Inhibitor For Sulhamic Acid

CHEMTEX'S Inhibitor For Sulfamic Acid Is A Multi Acid Corrosion Inhibitor Based On Diethyl Thiourea, Stabilizers And Surfactants.

CHEMTEX'S Inhibitor For Sulfamic Acid Is Semi Foaming Acidic Corrosion Inhibitor That Is Suitable For Pre-Formulated Descalant.

CHEMTEX'S Inhibitor For Sulfamic Acid Is Suitable For Metal Such As Copper, Brass, Nickel, Tin, Lead, Zinc, Galvanized Surface And All Type of Steel.

Key Features and Benefits

Application and Dosage
CHEMTEX'S Inhibitor For Sulfamic Acid Is Used At A Concentration of 2 To 3% W/W of Dry Acid Depending On Temperature Requirement.

CHEMTEX'S Inhibitor For Sulfamic Acid Is Effective Up To Temperature of 85oc Or 185of. For Further Details On Dozing Kindly Contact Our Csl Representative.

Handling Measures and Precautions
Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.

Storage
This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

Packing
CHEMTEX'S Inhibitor For Sulfamic Acid Is Available In 25 Kgs Wide Mouth Jars And Bags.







Sulfamic Acid GP Grade

CHEMTEX'S Sulfamic Acid Gp Grade Is An Effective Descalant And Is Used For Cleaning of A Variety of Industrial Equipments And Domestic Appliances. CHEMTEX'S Sulfamic Acid Gp Grade Can Be Used For Removing Water And Process Scales From Industrial Equipments. Broadly These Find Use In The Chemical And Fertilizer Industry, Dairy And Food Equipments, Brewery Equipment, Marine Equipment, Sugar Industry Etc.

CHEMTEX'S Sulfamic Acid Gp Grade Is Non-Inflammable And, Unlike Hydrochloric Acid, Does Not Give off Obnoxious Fumes. The Safety of CHEMTEX'S Sulfamic Acid Gp Grade Has Been Further Increased By The Addition of Corrosion Inhibitors And Other Chemicals To Make CHEMTEX'S Sulfamic Acid Gp Grade A Versatile Descaling Agent Which Is Safer Still In Terms of Equipment Corrosion And Safety of Personnel. The Field of Descaling Is Wide And The Exact Application of CHEMTEX'S Sulfamic Acid Gp Grade Can Only Be Determined After Considering The Nature And Extent of Scaling, And The Type of Equipment That Is To Be Descaled.

Application and Dosage
CHEMTEX'S Sulfamic Acid Gp Grade Is Used In Various Applications And At Different Concentration Ratio Depending Upon The Amount And Type of Deposit And System Parameters.

Normally For A System With Hard Scale Deposits A 5-10% W/W Solution Is Recommended. Preferably This Solution Should Be Made With Pre-Heated Water At 70-80oc. The Total Volume of Solution Should Be About 1.2 Times of Water Holding Capacity of Equipment To Be Descaled. Recirculate The Solution For About 6 Hours Using A Acid Compatible Pump. After Descaling It Is Necessary To Passivate System With 2% Solution of Alstascale Ps20 Into The Last Rinse And Return To Normal Service.

Important

Handling Measures and Precautions
Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.

Storage
This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

Packing
CHEMTEX'S Sulfamic Acid Gp Grade Is Available In 50kgs Bags.







Sulphamic Acid Descaler

CHEMTEX'S SULPHAMIC ACID DESCALER is an efficient descaling agent and is used for cleaning of a variety of industrial equipments and domestic appliances. CHEMTEX'S SULPHAMIC ACID DESCALER can be used for removing water and process scales from industrial equipments. Broadly these find use in the chemical and fertilizer industry, dairy and food equipments, brewery equipment, marine equipment, sugar industry etc.

CHEMTEX'S SULPHAMIC ACID DESCALER is non-inflammable and, unlike Hydrochloric Acid, does not give off obnoxious fumes. The safety of CHEMTEX'S SULPHAMIC ACID DESCALER has been further increased by the addition of corrosion inhibitors and other chemicals to make CHEMTEX'S SULPHAMIC ACID DESCALER a versatile descaling agent which is safer still in terms of equipment corrosion and safety of personnel. The field of descaling is wide and the exact application of CHEMTEX'S SULPHAMIC ACID DESCALER can only be determined after considering the nature and extent of scaling, and the type of equipment that is to be descaled.

Application and Dosage
CHEMTEX'S SULPHAMIC ACID DESCALER is used in various applications and at different concentration ratio depending upon the amount and type of deposit and system parameters. Normally for a system with hard scale deposits a 5-20% v/v solution is recommended. Preferably this solution should be made with pre-heated water at 70-80°C. The total volume of solution should be about 1.2 times of water holding capacity of equipment to be descaled. Recirculate the solution for about 6 hours using a acid compatible pump. After descaling it is necessary to passivate system with 2% solution of ALSTASCALE PS20 into the last rinse and return to normal service.

Important

Handling Measures and Precautions
Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.

Storage
This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

Packing
CHEMTEX'S SULPHAMIC ACID DESCALER is available in 50kgs bags.

Keywords
SULPHAMIC ACID DESCALER, SULFAMIC DESCALANT, SULPHAMIC DESCALANT, SULPHAMIC DESCALER, SULFAMIC ACID






Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name