Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Water Treatment Chemicals » RO Chemicals » RO Antiscalant High Silica

RO Antiscalant High Silica

The Ro Antiscalant High Silica is ideally used for removing scale and fouling in the system along with the high dispersion of silica on the wall surfaces of reverse osmosis system. The performance of RO membrane gets negatively impacted due to suspended microorganisms, mineral scale and solids. These antiscalants are formulated by using premium grade inhibitors along with the employment of advanced methodologies.The products which we cater under RO Antiscalant with High Silica are High Silica RO Antiscalant, Silica Antiscalant (High pH), Reverse Osmosis Antiscalant for High Iron Water.

These formulations improvise the performance of RO systems by impeccably eliminating scale, corrosion and dispersed content. The colorless chemicals are comprised with antifoulants, silica dispersants and antiscalants, which effectively improvise the functioning of RO systems. These antiscalants are known for their attributes like extend membrane life, non-reactive to other chemicals, impeccably controlling of mineral scale and reduce operational shutdown time. This organic chemical compound is suitable for equipments used in water treatment plants, food processing, dairies and breweries.





High Silica RO Antiscalant

CHEMTEX'S High Silica Ro Antiscalant is a specific Anti-scalant for Reverse Osmosis membrane feed water effective in controlling deposition of inorganic scales and higher levels of silica and metal oxides. CHEMTEX'S High Silica Ro Antiscalant helps in control of silica scales and ideally suited for increasing membrane life and reduces unscheduled shutdowns for cleaning operations.

It is a very effective antiscalant for waters with LSI upto +2.5, Iron upto 1.5ppm in reject, Silica upto 325ppm (or mg/l) in reject, High SDI.

Key Features and Benefits
Application and Dosage
CHEMTEX'S High Silica Ro Antiscalant is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 2ppm and maximum dosage

at 20ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.

High alkalinity and hardness can be controlled by dosing 2-3ppm of product. But in case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 5- 7ppm for stabilizing Calcium.

At about 10ppm dosage CHEMTEX'S High Silica Ro Antiscalant is capable of fully inhibiting high iron, calcium,and silica upto 325ppm in reject.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S High Silica Ro Antiscalant is available in HDPE containers in various pack sizes.






Silica Antiscalant (HIGH Ph)

Chemtex's silica antiscalant (high pH) is a chemical compound that is useful for preventing silica fouling in the RO membrane. The silica antiscalant is a alkaline product and is very much suitable for being added to drinking water system.

Application and Dosage
The usual dosage range for silica antiscalant (high pH) is from 2-10ppm. For very severe conditions this may go upto 15ppm in small installations. You are requested to refer your Chemtex representative for advising you the best dosage or application method.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Available in various pack sizes.






Reverse Osmosis Antiscalant For High Iron Water

Chemtex's Reverse Osmosis Antiscalant for High Iron Water is a blend of chemical compound that is designed for iron rich feed water. This helps to prevent iron fouling in the RO membrane.

Application and Dosage
The usual dosage range for Reverse Osmosis Antiscalant for High Iron Water is from 2-10ppm. For very severe conditions this may go upto 15ppm in small installations. You are requested to refer your Chemtex representative for advising you the best dosage or application method.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Available in various pack sizes.




x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name