Chemtex Speciality Limited

CHEMTEX'S Acidic Coil Cleaner is a liquid cleaner and brightener for complete removal of dust, dirt, greasy-oily soils, carbon deposits and grime on the aluminum fins and copper coils of ahu, fcu, air conditioners (indoor and outdoor), car condenser and radiator, air cooled chillers, air cooled condensers, air cooler tube bundle etc. It rapidly cuts organic deposits and disinfects the system to circulate fresh and healthy air with assured upgradation in IAQ (Indoor Air Quality). It has self foaming characteristics that starts generating immediate foam when it comes in contact with dirt, enabling excellent penetration of the product into the coils for complete cleaning that instantly shows increase of cfm/air velocity.

Key Features and Benefits

• Excellent cleaner and brightener
• Removes of oil and grease
• Non-Acidic; Compatible with copper and aluminum
• Quick action
• Good dispersion for quick rinsing
• Fortified with corrosion inhibitor
• Concentrated product
• Self foaming
• Economical

Non Acidic coil cleaners are very effective, safe, and offer excellent cleaning results in most all conditions, on both condenser and evaporator coils. These cleaners usually produce a mild odor, if any, while effectively removing foreign materials from the surface of the coils. However, Non acidic coil cleaners are caustic, so care is necessary when they are used. While these cleaners do not damage property and equipment as readily as acids, overspray and residue should be rinsed thoroughly to avoid potential problems.Due to mild odors and general cleaning ability, Non acidic cleaners can be used as a general-purpose coil cleaner.

Key Features & Benefits

• Cleans difficult-to-reach areas • Brightens as well as cleans • Enhances Efficiency of Coils units • Promotes energy savings • Saves time when cleaning

Chemtex’s Condenser Descalant is an alkaline formulation designed for the removal of mineral scales, metal oxides, and silica scale deposits from water systems generally prone to accumulating deposits. It is a combination of acid and inhibitors. Easily can protect cleaned surfaces from acidic attacks. This formulation is safe for most common metals such as MS, SS, Copper, Cast Iron, Copper alloys such as Cu-Ni except zinc and galvanized surface.

Key Features and Benefits

• Helps to remove limescale deposits from surfaces and appliances
• High inhibition efficiency and low foaming nature.
• Effectively eliminate foul odors from equipment and machinery.
• Non-hazardous substance
• Excellent in removing silicates
• Economical/ Cost-effective
• Excellent derusting and descaling property.

Chemtex’s Condensate Line Corrosion Inhibitor is a blend of filming amines with neutralizing amines of low and high vapour/liquid distribution ratio to provide protection to all stages.

Chemtex’s Condensate Line Corrosion Inhibitor neutralizes carbon dioxide within the condensate system and prevents corrosion due to carbonic acid formation in the initial, middle and extended areas of condensate system.

Chemtex’s Condensate Line Corrosion Inhibitor contains multi-functional corrosion inhibitors, designed for use in steam and complex condensate systems. It can be used up to 170 kg/cm2 or 160bar or 2400 psig pressure and temperature up to 450oC (840oF)

Key Features and Benefits

• Prevents stress cracking corrosion due to high CO2
• Inhibits formation of carbonic acid and thus prevents uniform corrosion
• Compatible with other treatment chemicals
• Returns to the feed line with the condensate return so raises the feed water pH