Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Water Treatment Chemicals » Waste Water Treatment Chemicals » Polyelectrolye Flocculant

Polyelectrolye Flocculant

The Polyelectrolye Flocculant is idyllically utilized in divergent domains for applications such as water clarification, effluent treatment, product thickening. We process this flocculant under higher prudency with precise pH value to make it suitable for different industrial applications. These products are water soluble polymers that take the ionic charge all along the polymer chain.The products which we cater under Polyelectrolyte Flocculant are Non-ionic Polyelectrolyte, Secondary Flocculation with polyelectrolyte, Dewatering Polyelectrolyte, Deoiling Polyelectrolyte.

The salient features of our flocculants are effective precipitation of dye, improvise the water clarity and superior cleaning performance. Our flocculant is ideally used in medical, biochemical, cosmetic, food, paper, oil, leather, steel and various other industries for dewatering sludge, decolorizing, effluent treatment and various other purposes.





Non-ionic Polyelectrolyte

CHEMTEX'S Non-Ionic Polyelectrolyte is used for used for various solid-liquid separation application such as sludge dewatering, STP setting, oil field applications, drilling muds, minerals processing, paper-making, chemical wastewater treatment etc.

Key Features and Benefits
Application and Dosage
CHEMTEX'S Non-Ionic Polyelectrolyte dry PAM non-ionic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water. However, the temperature of water should be refrained from above 50\B0C. Treatment Levels (for use as)
Air Flotation Flocculants : 0.1~ 5.0 ppm
Thickening Flocculants : 0.1~ 5.0 ppm
Dewatering Flocculants : 0.1~ 1.0 ppm

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Non-Ionic Polyelectrolyte is supplied in 25kgs packs.







Secondary Flocculation With Polyelectrolyte

Secondary Flocculation With Polyelectrolyte is the process in with the efflent water is added with polyelectrolytes for final settling. Before the secondary settling usually the effluent is dosed with primary coagulants that function to make the solids coagulate and become heavier. This helps the secondary flocculants or polyelectrolyte to instantly form flocs and do the seperation with following benefits:-

Types of secondary flocculation polyelectrolyte
Secondary Flocculating Polyelectrolytes are of various types. The range primarily includes different variants of polyacrylamide with differenct molecular weights such as low molecular weight (LMW Polyelectrolyte), medium molecular weight (MMW Polyelectrolyte), high molecular weight (HMW Polyelectrolyte) and ultra high molecular weight (UHMW Polyelectrolyte) and ionic charges such as Anionic Polyelectrolyte, Cationic Polyelectrolyte, Non-Ionic Polyelectrolyte and Amphoteric Polyelectrolyte.

Primary settling coagulants such as alum, PAC (poly aluminum chloride), ferric chloride, ferrous sulfate etc are used and from the organic range products like poly DADMAC, polyamine and poly DCDA are used.

The selection is based on type of application, system parameters and effluent type.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Secondary Flocculation With Polyelectrolyte is supplied in 25kgs pack.







Dewatering Polyelectrolyte

Dewatering Polyelectrolyte
CHEMTEX'S Dewatering Polyelectrolyte is a high molecular wt. cationic polyelectrolyte in powder form. It is used for dewatering of organic sludge from sewage, pharma and biotechnology industry. The product is highly effective in dewatering of organic sludge from pharma effluent.

Key Features and Benefits
Application and Dosage
CHEMTEX'S Dewatering Polyelectrolyte dry cationic polymers are recommended for the following solid-liquid separation process:

Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
Water clarification - improves influent, process and effluent water quality by reducing suspended solids and turbidity.
Dissolved air flotation - result in cleaner subnatants, increased float solids and greater throughput.
Filtration - improve filtered water quality and plant throughput.
Thickening - improved compaction, settling drainage and effluent quality.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S HIGH PH MEMBRANE CLEANER is available in HDPE containers packed in various pack sizes.
Yes I'm Interested







Deoiling Polyelectrolyte(dope)

Deoiling Polyelectrolyte
CHEMTEX'S Deoiling Polyelectrolyte(dope) is a powder polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.

Application and Dosage
The dosage range of CHEMTEX'S Deoiling Polyelectrolyte(dope) varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of CHEMTEX'S Deoiling Polyelectrolyte(dope) .

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Deoiling Polyelectrolyte(dope) is supplied in 25kgs pack.
Yes I'm Interested







Drilling Mud Additives

Drilling Mud Additives
Partially hydrolyzed polyacrylamide or PHPA in short serves as a polymer for drilling mud additive.It is a high molecular weight polymer that controls fluid loss and increases viscosity andreduces friction. It can be used as a flocculant, lubricant, dispersant, blocking agent, well drilling mud raw material or fluid loss additive.

Chemtex Speciality Limited is an ISO 9001, ISO 14001 and OHSAS 18001 certified manufacturer and supplier of Drilling Mud Additives. We have been in this field of chemicals for over a period of 40 years and we will continue to extend our services towards enriching the circadian operations of other industrial sectors.


Key Features and Benefits
Yes I'm Interested







Drilling Mud Chemical

Drilling Mud Chemical
PHPA (Partially hydrolyzed polyacrylamide) is a polymer that is manufactured by Chemtex Speciality Limited to serve as a drilling mud additive.As a high molecular weight polymer, it aids in controllingthe fluid loss and increases viscosity andreduces friction. It can be used as a flocculant, dispersant, lubricant, blocking agent or fluid loss additive.

Chemtex Speciality Limited is an ISO 9001, ISO 14001 and OHSAS 18001 certified manufacturer and supplier of Drilling Mud Chemical. We have been in this field of chemicals for over a period of 40 years and we will continue to extend our services towards enriching the circadian operations of other industrial sectors.


Key Features and Benefits
Yes I'm Interested







Acrylamide Powder

Acrylamide Powder
Chemtex Speciality Limited manufactures Acrylamide- Powder which serves to be used as a high molecular weight polymer suitable for sugarcane juice clarification and filtration of mud slurry that is especially designed for food industry. It requires a lower dosage and helps in improving the juice clarity and increases rate of mud filtration. It also helps in improving the sugar recovery from filter cake and also reduces consumption of alum in precipitation of color and colloidal matter.

Yes I'm Interested










Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name