Oil and Gas Chemicals

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Antifoaming Agents by its name can be identified as a chemical that inhibits the formation of foam or control the foam in a working system. In oilfields, these agents work as foam retardants in water handling systems of hydrocarbon process. The surface components of this formulation incapacitate the bubble films which results in fusing of small bubbles together up to the break even point
Key Features:
• Cost effective Dosage
• Fast rate of defoaming
• Works at a wide range of pH
• Assist in faster breakkdown of foam

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Crude Oil are susceptible to brines of sodium, calcium and other metals and needs to undergo desaltation process in refinery so as to avoid the formation of corrosive hydrogen chloride gas. Normal desaltation or water wash proves to be not sufficient enough for complete removal of salt particles and hence comes the use of neutralizing amines or blend of different amines which react with brines to form non-corrosive by products and can be easily removed.

Key Features and Benefits

• Synergistic blend of amines
• Does not alter metallic attributes
• Flexible to be used in batch or in continuous process
• Effective over a wide range of pH and temperature
• Economical

Approx. Rs 10,000 / Bunch Get Latest Price

Tank Cleaner is a specifically formulated cleaner when used, helps in recovering highest amount of hydrocarbons from the crude oil sludge that tends to get deposited at the bottom of the storage tank. It becomes very difficult for any mechanical equipment to take the sludge out from the bottom of the tank. Sometimes, the equipment even damages the tank while taking out the sludge because of its hardness. This formulation softens the hardness of the sludge and removes the glutinousness, making it suitable for removal by any mechanical way.

Key Features:
• Increases the capacity storage of the oil tank
• Increases the efficiency
• Can replace the use of heavy mechanical means for cleaning

Approx. Rs 10,000 / Bunch Get Latest Price

H2S Scavenging chemicals are the specific formulations which has the ability to convert toxic hydrogen sulphide gas into useful corrosion inhibitors and prevent corrosive attacks of these toxic gases. This chemical has proved to be very effective in removing H2S gas from liquid or gas phases and also its offensive smell. H2S gas damages pipeline material, either by reacting with the metal to create an iron sulfide corrosion film, or by acidifying the liquid/gas mixture in the pipes. Therefore, it becomes a necessary step to remove H2S from crude oil as quickly and efficiently as possible.

Key Features:
• Provides effective corrosion control
• Reduction of solid build up
• Boosts production
• Increases profitability

Approx. Rs 10,000 / Bunch Get Latest Price

Corrosion Inhibitors for refineries are specifically formulated to be used in various refinery sectors in order to improve the efficiency of the total refinery system. In refineries, there is a tendency of formation of some undesirable compounds that have adverse effects on the metallic equipments. So there is a need to reduce their formation in order to save the metallic body. The range of product that caters under this classification are Corrosion Inhibitor for Amine Regenerators, Sea-Water, Crude, ARU, DHDT, FCC HDS, HGU, SRU and other application based equipments. All these products meet the standard requirement and enhance the total working of the system.

Key Features:
• Effective removal of corrosive compounds
• Enhance equipment working life

Approx. Rs 10,000 / Bunch Get Latest Price

Oilfield Corrosion Inhibitors are specifically formulated to inhibit the corrosive attack of acidic gases that comes out during extraction of crude oil at oil well sites and overhead condensation system. This formulation provides a controlled pH system and will not film out onto carbon steel and alloys.

Key Features:
• Effective control of organic acid corrosion
• High temperature performance
• Does not form emulsion

Approx. Rs 10,000 / Bunch Get Latest Price

Diesel engines rely on fuel to lubricate many of the moving parts of fuel injection equipment. Low fuel lubricity can lead to fuel pump wear and engine failure. To meet the lubricity requirements, specifically formulated chemicals are needed in order to boost and upgrade the lubricity of the fuel. This fuel improver transmits effective boundary lubrication for a broad range of diesel and fuels.

Key Features:
• Enhance the lubricity of diesel and other fuels
• Multi-product pipeline compatible
• Does not affect the attributes of diesel or fuel

Approx. Rs 10,000 / Bunch Get Latest Price

Pour Point Depressant is specially formulated polymeric additive in hydrocarbon solvent used as a broad spectrum pour point depressant additive, designed to limit crystal size and growth, thereby improving diesel fuel flow. PPD efficiently reduces the pour point of middle distillate and diesel blends.

Key Features:
• Helps avoid expensive blending of stocks
• Better Handling and Storage
• Helps achieve lower pour point for winter specification of diesel

Approx. Rs 10,000 / Bunch Get Latest Price

Corrosion inhibitors are formulations when added to a chemical stream prevent corrosion, or lower the rate of corrosion so that the metallic equipment gets an elongated service lifetime. Corrosion inhibitors are often the most cost-effective way to prevent or control corrosion because they allow one to use less expensive metals for a corrosive environment. There are hardly any industries which do not require the use of heavy metal machineries and equipment. These metallic equipment tends to get corroded due to some undesirable materials that gets accumulated or deposited in their surface or inner parts while working. In order to maintain their working efficiency, proper maintenance is needed and timely removal of these deposits are required. Using corrosion inhibitor is one of the most important aspect of smooth running of industrial sectors.
 
Key Features: 
• Reduce the corrosion rate of a particular metal
• Ensures longevity of metallic life
• Cost effective dosage
• Effective removal of corrosive agents

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 350 / Kg Get Latest Price

Product Brochure
Chemtex 901 Imidazoline series are thermally stable, organic, nitrogenous bases that form the basic constituent of corrosion inhibitors for use in oil and gas industries. These properties make Imidazolines one of the key intermediates for a variety of industrial applications. Imidazoline, an effective organic corrosion inhibitor used in acidic and aggressive environment, can form an adsorption film on the surface of metal, slowing down the diffusion of ions and inhibiting the occurrence of metal corrosion.
Chemtex 901 Series meet extreme corrosion challenges for low and middle range temperature oil and gas extraction sites, downhole operations. Depending on the conditions, operating limitations and specific applications, Imidazoline can be formulated as oil soluble, oil soluble/water dispersible or water soluble/oil dispersible.
Imidazoline manifests corrosion inhibition property in oil based and water based systems (having low acid acetate salts). Its hydrophobic bond prevents any kind of reaction between corrosive elements and metal ions by forming an adsorption layer over the application surface and its hydrophilic bond ensures its stability. The cationicity of imidazoline helps it to remove water and foster adhesion in damp environment. 
Application Areas Makes an excellent base for corrosion inhibitor formulations High active matter content Good lubricity improver Thermally stable Soluble in both non-polar solvents and mineral oils Strongly cationic in acidic medium, adsorbing onto metal surfaces Hydrophobic; Water repelling agent Easy to handle, clear liquid at room temperature Excellent sour corrosion inhibition performance for low salinity brines and moderate temperature Good wetting agents Mild on eyes and skin

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Approx. Rs 10,000 / Bunch Get Latest Price

Biocides are required to control areobic and anaerobic bacterias and slime formers which has tendency to occur in oilfield ater injection and disposal systems. This formulation is unique as it provides dual protection from micro-organisms as well as corrosion.Key Features: Rapid Action Thermally Stable Does not cause Turbidity

Approx. Rs 10,000 / Bunch Get Latest Price