Chemtex Speciality Limited

Descaling Chemicals are designed for using the removal of limescale deposits from metal surfaces in contact with hot water, such as boilers, water heaters, etc. it is highly admirable in the market for precise pH value, suitability for high & low-pressure boilers & excellent protection from tube failures. It produces soluble salts and carbon dioxide gas by reacting with alkaline compounds present in the scale and metal. The chemicals are suitable for de-scaling the equipment utilized in pharmaceuticals, oil refineries, power plants, food industries, and beverage industries.

Key Features and Benefits

• Effective removal of limescale deposits and mineral salts
• Inbuilt corrosion inhibitor
• Excellent de-rusting and descaling
• Suitable for all types of water systems.
• Cost-Effective

• Prevents stress cracking corrosion
• Does not add TDS
• Reduces blow down requirement
• Saves Power
• Compatible with other treatment chemicals
• Returns to the feed line with the condensate return so raises the feed water pH.

Morpholine is widely used as a neutralizing amine in combating carbonic acid corrosion in condensate return lines of steam boiler systems. The morpholine volatilizes with the steam from the boiler and condenses when the steam does, thereby affording protection to the lines, which otherwise would be subjected to corrosion by the carbonic acid present in the steam condensate. Morpholine is a component of a corrosion inhibitor system that prevents decomposition of a chlorinated hydrocarbon in a composition containing the chlorinated hydrocarbon and a large amount of water. Corrosion of metal aerosol containers and valves can be prevented by the use of low levels of morpholine.

• Ensures rapid heat exchange with excellent heat transferring ability for optimum engine cooling and longer engine life
• With corrosion inhibitors, antifoaming additives for surface protection from rust and corrosion.
• Lower viscosity ensures lower pumping requirements
• Saves power and increases heat transfer efficiency with consistent performance over time

• Improved efficiency of the clarifier
• Reduced retention time
• Suitable for any pH range
• Decreased Mud volumes
• Instant color change
• Compressed filter cakes
• Effluent colour reduction
• Superior floc formation
• Major effects yielded with limited use
• Superior cleaning performance

Additional Information:

• Packaging Details: PP bags

Acid Corrosion Inhibitor developed by Chemtex Speciality Limited is a substance, that effectively reduces the corrosion rate of a metal exposed to that environment. It has been uniquely formulated for preventing all types of acidic attack on the metallic surface in various industrial process and applications, degrading its strength as well as its properties. Acid Corrosion Inhibitor generally helps to impede corrosion by adhering to the metal surfaces and forms protective films which serves to prevent both cathodic and anodic reactions.

Key Features and Benefits:

• Effectively prevents acidic attack on metal surface
• Cost effective dosage
• Does not alter the properties of metal

Industrial Cleaner and Degreaser are chemicals that are bio-degradable products with control foaming properties developed for the removal of grease, oil, lubricants and other organic soils, cutting oil, lubricating oil, waxy films, honing oils, bending oils, stamping oils, drawing compounds and many other contaminants. The metal degreaser easily removes them with no impact to the metal. In addition to effective degreasing, it also provides corrosion protection after cleaning making it the best industrial degreaser in its category. This metal degreaser compatible for both ferrous and non-ferrous metals.

Key Features and Benefits

• Degreases and cleans fast
• User Friendly
• Controlled foaming properties
• Compatible with all types of metals
• Biodegradable

Silicone oil which exhibits different degrees of polymerization and viscosity. It can be used in every machinery parts and provide a protection surface on the parts and also have better lubricity. It finds its application in in textile auxiliaries, antifoaming agents, water-proofing agents, metallic treatment, siliconization of glass, plastics, rubber, etc. Furthermore, silicone fluids offer the advantages of very low volatility, excellent shearing resistance, low surface tension and very high and durable water repellence. It provides long-lasting lubrication, smooth feel, and emollience in applications like skincare, sun care, and oral care products. It can also use in the medical disposal industry for application of syringes, needles, etc.

Key Features & Benefits

• Non-greasy films
• Inert
• Good dielectric attributes; Stable over a wide range of temperature
• Low surface tension; Excellent water repellence
• Low odour toxicity and skin sensitization
• Compatible with other system additives

RO Antiscalant, manufactured by Chemtex Speciality Limited, is a liquid antiscalant for RO membrane system. Using Chemtex’s RO Antiscalant controls inorganic scales of calcium, magnesium, barium, stronium, fluoride, iron and silica. Chemtex’s RO Antiscalant ensures above 80% reduction in scaling tendencies if used continuously.

It is a very effective antiscalant for waters with LSI upto 2.7, Iron upto 1.4ppm in reject, Silica upto 175ppm (or mg/l), High SDI. It is compatible with ALSTAFLOC series of coagulant and flocculants (polyelectrolytes).

Chemtex’s RO Antiscalant keeps RO capacity close to design, and minimizes shutdowns and membrane cleaning cost.

Key Features and Benefits

• Effective scale inhibition
• High recovery rate
• Low Chemical dosage
• Cost Effective
• Effective Iron fouling control by sequestration
• Reduced frequency of membrane cleaning
• Compatible with all types of membranes

Pre-inhibited glycol is a specially formulated chemical additive for protecting system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways. It modifies the metal surface by absorption and making it less susceptible to corrosion. It also gives a high degree of corrosion protection to engine components radiators, water pump seals, and heat exchangers. It is mainly used for two purposes, as a raw material in the manufacture of polyester fibers and for antifreeze formulations.


Key Features & Benefits

• Odourless, Colourless, Viscous Liquid
• Pre-Inhibited for corrosion prevention
• Excellent descaling efficacy
• Non-hazardous, Non-Corrosive
• Compatible with hoses and rubber
• Extended Life Coolant
• Does not contain silicates
• Non-foaming in nature-reduces nucleate and hot spot boiling

Sulfamic Acid is non-volatile, odourless substance, widely used for the removal of scales and metal oxide deposits from the surface metal, and possesses a scale solubility capacity with added corrosion inhibitors which give maximum protection to metal boilers or equipment being cleaned. It serves the removal of hard water scales, protein deposits, copper corrosion, rust from cooling towers, heat exchangers, coilers, condensers, and various other heating & cooling systems. It is used in the paper and pulp industry, where it prevents pulp degradation caused by high temperatures, as well as allows for bleaching. 

Key Features & Benefits

• Versatile Descaling Agent
• Non-flammable
• Excellent de-rusting and descaling
• Suitable for all types of water systems.
• Cost-Effective

• Exhibits slime dispersing property
• Prevents metal contamination
• Broad Spectrum Applications
• Non-Hazardous

• Powerful descaling action that quickly dissolves mineral deposits.

• Disinfectants surfaces as it cleans and leaves fresh odor after application. 

It is designed for the internal treatment of water used in the boiler. It contains a corrosion inhibitor, an anti-scaling, and a sludge conditioner. It helps to prevent the deposition of calcium, iron, and iron-oxide and also helps in the removal of the existing surface. It also contains a corrosion inhibitor which forms a protective passive film over the boiler heat transfer surface. It keeps heat transfer efficiency and also reduces downtime.

Key Features & Benefits:

• Prevents scale formation • Inhibits sludge formed due to metal ions and metal oxide deposits • Keeps the boiler internals clean and minimizes downtime for maintenance • Prevents corrosion by buffering pH • Compatible with other treatment chemicals • Introduces a passive film on the boiler surface to prevent corrosion • Completely biodegradable and organic chemicals • Enhances heat transfer ability and hence saves energy and increases productivity

Tono Frost 593 is NSF certified with HT1 (Heat transfer fluid with incidental contact)

Inhibited PG is used as an industrial coolant, antifreeze heat transfer agent. The inhibitor package has been designed specifically to protect brass, solder, copper, steel, aluminum, cast iron, and other metals commonly found in the industrial cooling and heating systems.
The effectiveness of Inhibited PG in preventing corrosion has been proven in extensive laboratory and in actual service tests. Using the product for heat transfer applications instead of brine solutions or uninhibited propylene glycol helps in reducing maintenance costs and improving heat transfer efficiency.

Key Attributes and Benefits:

• NSF Certified HT1
• Extends system metal life
• Does not form sludge deposits
• Increases glycol life by avoiding degradation
• Saves power and increases efficiency
• Does not affect freeze protection properties
• Avoids leaking owing to too much corrosion

Application Areas

• F&B, breweries, distilleries
• Dairy & ice cream
• Packaged food industry
• Fish processing units
• Pharma & bulk drugs
• Poultry processing
• Vegetable oil

• Incorporated with flocculant technology for severe treatment needs.
• It is economical
• Helps in dewatering of sludge from industrial effluent

A cationic polyelectrolyte formulation used in water treatment processes as coagulating and flocculating agent. It combines suspended solids into cluster, removes the floc from the liquid. Being a cationic charge particles, it easily flocculates negatively charged particles and accumulates suspended solids in seawater, provides improved solid particle filtering efficiency. 


Key Features and Benefits

• Incorporated with flocculant technology for severe treatment needs.
• It is economical
• Helps in dewatering of sludge from industrial effluent