Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Water Treatment Chemicals » Scale And Corrosion Inhibitor » Hydrostatic Testing Corrosion Inhibitor

Hydrostatic Testing Corrosion Inhibitor

Our precisely and cautiously formulated Hydrostatic Testing Corrosion Inhibitor is commandingly suitable for inhibiting the corrosion from the interior metal surfaces. We make use of finest quality ingredients and chemical compositions to ensure excellent protection from corrosion. These chemicals are highly effective in the amalgamation of oxygen scavengers and biocides. Our formulations effectively prevent pipelines and equipments from corrosion where sea water or sweet water is being utilized. The products which we cater under Hydrostatic Testing Corrosion Inhibitor are Organic Corrosion Inhibitor, Copper Corrosion Inhibitor, Sea Water corrosion inhibitor, water Hydro Testing Corrosion Inhibitor etc.

The features of our offered inhibitors are highly miscible in water, accurate composition, precise pH value, excellent corrosion prevention and biodegradable. The Hydrostatic Testing Corrosion Inhibitor is utilized for preventing pipelines, equipments, valves and various other hydrostatic instruments from corrosion. This inhibitor should be stored in a closed container at ambient temperature and away from sunlight.





Organic Corrosion Inhibitor

PROTODIN\AE is a specially formulated chemical additive for Propylene Glycol and Ethylene Glycol to protect system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways.

PROTODIN\AE modifies metal surface by absorption and making it less susceptible to corrosion. It buffers the organic acids formed as a result of glycol oxidation and prevents further formation of acids. PROTODIN\AE is compatible and fully functional in glycol-water & glycol-ethanol (rectified spirit) mixtures and improves heat transferability.

Key Features and Benefits
Application and Dosage
Under normal conditions, the dosage of PROTODIN\AE is 8% w/w of the glycol quantity.

However, the required dosage may vary depending upon working conditions, pH and glycol-liquor or glycol-spirit ratio. Please refer your CSL representative to calculate the required dosage for your plant

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
PROTODIN\AE is available in 220kgs barrels.







Copper Corrosion Inhibitor

CHEMTEX'S Copper Corrosion Inhibitor is a yellow metal corrosion inhibitor developed for use in closed loop system containing chiller or hot water. It prevents corrosion or rusting of yellow by forming a passive coating of protective film on copper and cu-alloys.

CHEMTEX'S Copper Corrosion Inhibitor contains organic dispersants that helps to keep the surface of the systems clean and thus provides the basis for the formation of an effective corrosion protection film.

CHEMTEX'S Copper Corrosion Inhibitor is mainly applied in chw line of hvac systems, glycol chiller, secondary cooling water systems of power plants, in the cooling systems of blast furnaces, in systems for cooling the molds in continuous casting mills and in hot and cold water systems in various industries.

Key Features and Benefits

Application and Dosage
CHEMTEX'S Copper Corrosion Inhibitor is added neat or diluted to the water. It can be mixed with water in any ratio. It can be dosed directly to the makeup tank or with metered injection dosing pump into the closed circuit. The dosage rate is dependent on the system conditions and the amount of water loss. Initial dosage is high to establish a film on the surface. Regular dosage may be required for compensating the loss due to leakage. Please refer to your csl service engineer for exact product dosage.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Copper Corrosion Inhibitor is available in 35kgs hdpe jars and barrels.







Sea Water Corrosion Inhibitor

CHEMTEX'S SEA WATER CORROSION INHIBITOR is a liquid product which is designed for preventing corrosion on Mild Steel and Carbon Steel (both low and high carbon) and in Sea water rich with chloride and fluoride.

CHEMTEX'S SEA WATER CORROSION INHIBITOR is a film forming compound and resists corrosion by repulsion technology and oxygen scavenging. It inhibits the formation of corrosive acids such as Hydrochloric and Hydrobromic Acid along with prevention of oxidation corrosion.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S SEA WATER CORROSION INHIBITOR is available in 215kgs HDPE barrels.







Water Hydro Testing Corrosion Inhibitor

CHEMTEX'S Water Hydro Testing Corrosion Inhibitor is a corrosion inhibitor based on Catalyzed Diethyl hydroxylamine which is designed for preventing corrosion on Mild Steel and Carbon Steel (both low and high carbon) and in Sea water rich with chloride and fluoride.

CHEMTEX'S Water Hydro Testing Corrosion Inhibitor is a liquid organic film forming compound for corrosion inhibition by repulsion technology and oxygen scavenging. It inhibits the formation of corrosive acids such as Hydrochloric and Hydrobromic Acid along with prevention of oxidation corrosion.

Key Features and Benefits
Application and Dosage
CHEMTEX'S Water Hydro Testing Corrosion Inhibitor should be fed neat with basic procedure to the tank/brine system at the rate of 100mg/l of the saline water volume used for hydrotesting. Slug feeding should be done to establish a fast protective film on the metal surface.

Protodin inhibited solution can be allowed to stay for up to 3 months under open air. The solution being organic in nature, can invite bio-fouling in presence of sunlight, in case of long term storage. To prevent biofouling ALSTACIDE CW30 should be dosed to the water at 80ppm.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. should not be injected. Please refer msds for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and msds for more details and shelf life.

Packing
CHEMTEX'S Water Hydro Testing Corrosion Inhibitor Is Available In 215kgs Hdpe Barrels.

Yes I'm Interested






Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name