Chemtex Speciality Limited
Chemtex Speciality Limited
Gobra, Kolkata, West Bengal
GST No. 19AADCC5168M1Z6
Send E-mail
Call 0804603069692% Response Rate

Corrosion Inhibitor


Our range of products include condensate line corrosion inhibitor, water hydro testing corrosion inhibitor, zinc phosphonate based scale and corrosion inhibitor, heat transfer fluid corrosion inhibitor, ethylene glycol corrosion inhibitor and hydrotesting corrosion inhibitor.

Get Best Quote

Approx. Rs 10,000 / Bunch Get Latest Price

Product Details:
Packaging TypeDrum
Pack Size35 - 200 kgs
Usage/ApplicationIndustrial Use
ApplicationIndustrial Use
FormLiquid
GradeTechnical and industrial
Physical stateLiquid

Chemtex’s Condensate Line Corrosion Inhibitor is a blend of filming amines with neutralizing amines of low and high vapour/liquid distribution ratio to provide protection to all stages.

Chemtex’s Condensate Line Corrosion Inhibitor neutralizes carbon dioxide within the condensate system and prevents corrosion due to carbonic acid formation in the initial, middle and extended areas of condensate system.

Chemtex’s Condensate Line Corrosion Inhibitor contains multi-functional corrosion inhibitors, designed for use in steam and complex condensate systems. It can be used up to 170 kg/cm2 or 160bar or 2400 psig pressure and temperature up to 450oC (840oF)

Key Features and Benefits
  • Prevents stress cracking corrosion due to high CO2
  • Inhibits formation of carbonic acid and thus prevents uniform corrosion
  • Compatible with other treatment chemicals
  • Returns to the feed line with the condensate return so raises the feed water pH

Application and Dosage:

Chemtex’s Condensate Line Corrosion Inhibitor is fed neat (undiluted) continuously to the boiler feed water depending upon the carbon dioxide content of the steam at about 2ppm per CO2 ppm based on steam use. Chemtex’s Condensate Line Corrosion Inhibitor should be dosed to give a pH of 8.5 to 9.0 in the condensate return at all times.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage:

This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing:

Chemtex’s Condensate Line Corrosion Inhibitor is available in the following pack size of 35/200kgs HDPE jars and barrels.

Yes! I am interested


Get Best Quote

Approx. Rs 10,000 / Bunch Get Latest Price

Product Details:
BrandPROTODIN
Packaging TypeHDPE Barrels
Pack Size215 kgs
Usage/ApplicationIndustrial Use
ApplicationIndustrial Use
GradeTechnical
ColorClear
Shelf Life24 months
MaterialLiquid

Chemtex’s water hydro testing corrosion inhibitor is a corrosion inhibitor based on catalyzed diethyl hydroxylamine which is designed for preventing corrosion on mild steel and carbon steel (both low and high carbon) and in sea water rich with chloride and fluoride.

chemtex’s water hydro testing corrosion inhibitor is a liquid organic film-forming compound for corrosion inhibition by repulsion technology and oxygen scavenging. it inhibits the formation of corrosive acids such as hydrochloric and hydrobromic acid along with prevention of oxidation corrosion.

key features and benefits
  • organic product with c, h, o and n molecules
  • easily miscible in water
  • non-toxic with ld50 2.2g/kg (oral, rat)
  • can be discharged easily
  • prevents oxidation and acid formation
  • does not add cod and bod
  • temperature resistance -25 to +122oc
  • eco-friendly

application and dosage
chemtex’s water hydro testing corrosion inhibitor should be fed neat with basic procedure to the tank/brine system at the rate of 100mg/l of the saline water volume used for hydro testing. slug feeding should be done to establish a fast protective film on the metal surface.

proton inhibited solution can be allowed to stay for up to 3 months under open air. the solution is organic in nature, can invite bio-fouling in presence of sunlight, in case of long-term storage. to prevent biofouling alstacide cw30 should be dosed to the water at 80ppm.
handling measures and precautions
proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. splashes on skin should be washed off with water immediately. in case of splashing into the eyes, flush it with fresh water and obtain medical attention. should not be injected. please refer msds for more details.

storage
this product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. please refer technical data sheet, label and msds for more details and shelf life.

packing
chemtex’s water hydro testing corrosion inhibitor is available in 215kgs hdpe barrels.

Yes! I am interested


Get Best Quote

Approx. Rs 10,000 / Unit Get Latest Price

Product Details:
Packaging TypeHDPE barrel and jar
Packaging Size5/10/1/20L and Custom
Usage/ApplicationIndustrial Use
FormLiquid
GradeTechnical
ColorClear
Product TypeScale and Corrosion Inhibitor
BrandALSTA
Physical stateLiquid

Zinc Phosphonate Based Scale And Corrosion Inhibitor is a superior blend of organic products designed to control scale, corrosion and non-biological fouling in cooling water systems. It is specially created to meet the needs of systems, containing high concentration of hardness salts.

Our Zinc Phosphonate Based Scale And Corrosion Inhibitor helps to keep the system surfaces clean and deposit free. It provides superior protection to system metallurgy under a variety of conditions.

Our Zinc Phosphonate Based Scale And Corrosion Inhibitor is an all organic and biodegradable treatment chemical and does not promote heavy metal discharge in blow down.

Key Attributes and Benefits:
• Designed with all organic chemicals
• Complete single treatment for prevention of non-biological fouling
• Excellent corrosion inhibition for all metals
• Can retain higher levels of hardness in the water & holds blow down to a minimum
• Keeps heat transfer surfaces clean and permits maximum heat exchange efficiency
• Excellent control of calcium phosphate sludge and iron fouling
• No disposal problem (contains no chromate, zinc or heavy metal)
• Effective over a wide pH and temperature range

Yes! I am interested


Get Best Quote

Approx. Rs 10,000 / Bunch Get Latest Price

Product Details:
BrandALSTA
Packaging TypeHDPE carboys
Pack Size35 kgs
Usage/ApplicationIndustrial Use
FormLiquid
GradeTechnical
ColorClear
Shelf Life24 months
Physical stateLiquid

Heat Transfer Fluid Corrosion Inhibitor is a specially formulated chemical additive to protect system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways.

CHEMTEX’S HEAT TRANSFER FLUID CORROSION INHIBITOR modifies metal surface by absorption and making it less susceptible to corrosion. It buffers the organic acids formed. CHEMTEX’S HEAT TRANSFER FLUID CORROSION INHIBITOR is compatible and fully functional in water, glycol-water, brine & glycol-ethanol (rectified spirit) mixtures and improves heat transferability.

Key Features and Benefits
  • Extends system metal life
  • Saves power and increases heat transfer efficiency
  • Increases life of Glycol by avoiding degradation
  • Does not affect Freeze protection properties
  • Does not form sludge deposit in the system
  • Avoids leakage and minimizes maintenance jobs
  • Avoids chances of Beverage, Brewery, and Dairy batch losses due to PHE leakage

Application and Dosage
In new plant or normal conditions, the dosage of CHEMTEX’S HEAT TRANSFER FLUID CORROSION INHIBITOR may vary depending upon working conditions, pH and glycol-or glycol-spirit ratio. Please refer your CSL representative to calculate the required dosage for your plant.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves, and boots should be worn while handling and applying chemicals. Splashes on the skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX’S HEAT TRANSFER FLUID CORROSION INHIBITOR is available in 35kgs HDPE carboys.

Keywords
Heat Transfer Fluid Corrosion Inhibitor, HTF Corrosion Inhibitor, Corrosion Inhibitor for Heat Transfer Fluid, Fluid System Corrosion Inhibitor

Yes! I am interested


Get Best Quote

Approx. Rs 10,000 / Bunch Get Latest Price

Product Details:
Packaging TypeHDPE carboys
Packaging Size5/10/1/20L and Custom
Usage/ApplicationIndustrial Use
ApplicationIndustrial Use
FormLiquid
Shelf Life24 months
BrandTHEODIN

Chemtex Speciality Ltd''s Ethylene Glycol Corrosion Inhibitor is a specially formulated chemical additive for mono ethylene glycol that protects system metals from corrosion. It is a multi-metal corrosion inhibitor which prevents corrosion In multiple ways.

Ethylene Glycol Corrosion Inhibitor modifies metal surface by absorption and making it less susceptible to Corrosion. It buffers the organic acids formed as a result of glycol oxidation and prevents further formation of acids. Our Ethylene Glycol Corrosion Inhibitor protects the metal surface from corrosion without reducing the system’s Heat Transfer Efficiency.

Key Attributes And Benefits:
• Extends System Metal Life
• Saves Power And Increases Heat Transfer Efficiency
• Increases Life Of Glycol By Avoiding Degradation
• Does Not Affect Freeze Protection Properties
• Does Not Form Sludge Deposit In The System
• Avoids Leakage And Minimizes Maintenance Jobs


Yes! I am interested


Get Best Quote

Approx. Rs 10,000 / Bunch Get Latest Price

Product Details:
Usage/ApplicationIndustrial Use
FormLiquid
GradeTechnical
Product TypeCorrosion Inhibitor
Shelf Life24 months
BrandPROTODIN

Hydrotesting Corrosion Inhibitor providing short time protection on interior metal surfaces of fuel tanks during hydrotesting application. It contains an effective blend of surfactants and film forming dispersing agents, showing activity in a broad range of temperature and pressure.

Features & Benefits:

- Certified non-toxic to aquatic life
- Added with oxygen scavengers for SS, C-steel
- For use in fresh waster and saline
- Can be used wtih biocides and other chemicals

Yes! I am interested


Get Best Quote

Approx. Rs 10,000 / Bunch Get Latest Price

Product Details:
Packaging typeBottle
Physical stateLiquid
GradeTechnical and laboratory
FormLiquid
AppearanceYellowish
Shelf life24 months
Flash PointN/A
PackagingHDPE

Volatile corrosion inhibitor (VCI) is used to protect ferrous metal against corrosion where it is not possible to otherwise apply on surface. vci slowly release compounds within a closed area that prevents surface rusting. an advantage of vci is that the levels of the inhibitor will recover if the container is opened and reclosed. a common mechanism of volatile corrosion inhibitor for inhibition of corrosion involves formation of a coating, which prevents the access of the corrosive substance to the metal. these volatile corrosion inhibitor release compounds within a sealed airspace that further helps in preventing surface corrosion actively. the effectiveness of a volatile corrosion inhibitor depends on quantity of water, fluid composition and flow regime. this product is commerce and manufactures by chemtex speciality limited having its facility in india. chemtex speciality limited is an iso 9001, iso 14001 and ohsas 18001 certified, specializes in volatile corrosion inhibitor products. it has also established itself to be among world's renowned volatile corrosion inhibitor exporter.

Yes! I am interested


 






Corporate Brochure




 

 

Send SMS
Shubham Karnani  (Director)
Chemtex Speciality Limited
111, Haute Street Corporate Park 86A, Topsia Road South
Gobra, Kolkata - 700046 , West Bengal , India
Send E-mail
Share Us:
X