Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Heat Transfer Fluids » Coolant & Coolant Additives » Coolant Thickener

Coolant Thickener

The Coolant Thickener is developed for thickening the coolants utilized in divergent machinery and equipments for lowering the temperature. Best grade chemical constituents and state of coolant formulating techniques are being employed in processing these thickeners. These thickeners increase the viscosity of the coolants as per the requirements. The products which we cater under this category are Viscosity Improver, Water Viscosity Enhancer and Defoaming Additive.

The features of our range of thickeners are precise pH value, high thermal capacity, non-reactive to chemicals and lower the fuel consumption. The thickeners are ideally utilized in automotive, HVAC and various industrial processing.






Viscosity Improver

CHEMTEX'S VISCOSITY IMPROVER for Coolant is an organic product derived from plant extracts to impart a cosmetic effect to the aqueous solution by increasing the viscosity of a water / glycol based industrial / automotive coolant.

CHEMTEX'S VISCOSITY IMPROVER is designed in such a way that it will not have any side effect on the metals (aluminum, copper, cast iron, steel etc.), rubber hoses, seals and other engine component and will pass through the glassware corrosion test.

In addition, CHEMTEX'S VISCOSITY IMPROVER also has a significant advantage that it looses its thickening properties when it is added to the engine. This helps by not causing a high pumping load on the radiator.

Packing
CHEMTEX'S VISCOSITY IMPROVER is available in 20kgs HDPE jars




 



Water Viscosity Enhancer

CHEMTEX'S WATER VISCOSITY ENHANCER is a plant extract based additive that helps to enhance the viscosity of water and other aqueous solutions.

There are various applications where higher viscosity is required for better physical appearance or look.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S WATER VISCOSITY ENHANCER is available in 20kgs HDPE jars







Defoaming Additive

CHEMTEX'S Defoaming Additive is an antifoam emulsion designed to provide optimum antifoam performance combined with excellent dilution stability and foam knock down performance.

Key Features and Benefits
Application and Dosage
CHEMTEX'S Defoaming Additive should be diluted with water prior to use to accelerate dispersion in the foaming medium. It can be diluted to any required concentration as per need. The preferred method of dilution is to add water to the emulsion and not vice versa. Avoid excessive shear while dilution. Pre-process testing is recommended. Suggested starting concentration is 50 - 100ppm depending upon foaming media.

Important: CHEMTEX'S Defoaming Additive is more effective in alkaline conditions

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Defoaming Additive is available in 35kgs HDPE jars and 200kgs HDPE barrels





Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name