Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Water Treatment Chemicals » Chiller Water Corrosion Inhibitor

Chiller Water Corrosion Inhibitor

The Chiller Water Corrosion Inhibitor is used for inhibiting the corrosion from the interior parts of the closed loop system containing chiller water. It forms protective film on the internals made up of ferrous metals to prevent corrosion. The product which we cater under Chiller Water Corrosion Inhibitor are Nitrite Based Corrosion Inhibitor, Molybdate Based Corrosion Inhibitor, Azole Based Corrosion Inhibitor, heat Transfer Fluid Based Corrosion Inhibitor etc.The inhibitors are acknowledged for its unique characteristics like non-foaming, saves power, excellent corrosion protection, improvise cooling efficiency, increase system\92s life, no heat exchanger descaling, good at lower concentration, non-inflammable, non-volatile, eco friendly and non-polluting. The corrosion inhibitors are suitably utilized in food processing units, beverage industry, dairies and various other industries for restraining corrosion.







Nitrite Based Corrosion Inhibitor

CHEMTEX'S NITRITE BASED CORROSION INHIBITOR is a superior blend of multi-metal corrosion inhibitors for closed loop system containing chiller or hot water. It prevents corrosion or rusting of metal by forming a passive coating of protective oxide film on steel.

CHEMTEX'S NITRITE BASED CORROSION INHIBITOR also contains a special yellow metal (copper) corrosion inhibitor,that protects copper and its alloys such as cupro-nickel, brass etc., from corrosion.

In case of hardness ingress CHEMTEX'S NITRITE BASED CORROSION INHIBITOR prevents scaling and deposition of calcium and magnesium hardness and iron deposits. Thus keeping the heat exchange at best efficiency.

Key Features & Benefits
Application and Dosage
CHEMTEX'S NITRITE BASED CORROSION INHIBITOR is a nitrite based system corrosion inhibitor program and should be added directly to the system in its neat form or diluted with clean, soft water to give a desired nitrite level. It can be dosed directly to the make up tank or with metered injection dosing pump into the closed circuit. The nitrite level varies from 600-2400 ppm (as NO2) depending upon the application.

Please refer to your CSL service engineer for exact product dosage.

Note : Nitrite based program is a completely organic and biodegradable program, for this reason, the nitrite is degraded by bacteria. A non-oxidising biocide such as Important ALSTACIDE CW30 at 50-100ppm dosage will prevent this degradation.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S NITRITE BASED CORROSION INHIBITOR is available in 35/220kgs HDPE jars and barrels.

Keywords
Nitrite based Corrosion Inhibitor







Molybdate Based Corrosion Inhibitor

CHEMTEX'S MOLYBDATE BASED CORROSION INHIBITOR is a molybdate based multi-metal corrosion inhibitor developed for use in closed loop system containing chiller or hot water. It prevents corrosion or rusting of metal by forming a passive coating of protective film on ferrous metals. It also prevents corrosion on non-ferrous metals. CHEMTEX'S MOLYBDATE BASED CORROSION INHIBITOR contains organic dispersants and antiscalants that helps to keep the surface of the systems clean and thus provides the basis for the formation of an effective corrosion protection film.

CHEMTEX'S MOLYBDATE BASED CORROSION INHIBITOR is mainly applied in CHW line of HVAC systems, glycol chiller, secondary cooling water systems of power plants, in the cooling systems of blast furnaces, in systems for cooling the molds in continuous casting mills and in hot and cold water systems in various industry.

Application and Dosage
CHEMTEX'S MOLYBDATE BASED CORROSION INHIBITOR is added neat or diluted to the water. It can be mixed with water in any ratio.It can be dosed directly to the make up tank or with metered injection dosing pump into the closed circuit.The dosage rate is dependent on the system conditions and the amount of water loss. Dosage may vary from 50ppm - 300ppm as molybdate depending upon application. CHEMTEX'S MOLYBDATE BASED CORROSION INHIBITOR should be added at 4kgs per KL of soft water to maintain 50-100ppm molybdate .

Please refer to your CSL service engineer for exact product dosage.

Note : Molybdate based program is a completely organic and biodegradable program, for this reason a non-oxidising biocide such as ALSTACIDE CW30 should be dosed at 50-100ppm active to prevent this degradation.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Molybdate Based Corrosion Inhibitor, Sodium Molybdate Corrosion Inhibitor, Closed Loop Corrosion Inhibitor, Na2MoO4 Inhibitor







Azole Based Corrosion Inhibitor

AZOLE BASED CORROSION INHIBITOR is compounds that prevent copper and cu-alloys corrosion inhibition. These yellow metals are found in various processes heating and cooling application with different types of heat transfer fluids such as water, brine, glycol etc. Azole based Corrosion Inhibitor is compatible with almost every heat transfer fluid and is highly effecting in preventing copper corrosion by forming a protective layer.

Application and Dosage
You are requested to refer your Chemtex representative for advising you the best dosage or application method.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
Available in various pack sizes.







Heat Transfer Fluid Corrosion Inhibitor

CHEMTEX'S HEAT TRANSFER FLUID CORROSION INHIBITOR is a specially formulated chemical additive to protect system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways.

CHEMTEX'S HEAT TRANSFER FLUID CORROSION INHIBITOR modifies metal surface by absorption and making it less susceptible to corrosion. It buffers the organic acids formed. CHEMTEX'S HEAT TRANSFER FLUID CORROSION INHIBITOR is compatible and fully functional in water, glycol-water, brine & glycol-ethanol (rectified spirit) mixtures and improves heat transferability.

Key Features and Benefits Application and Dosage
In new plant or normal conditions, the dosage of CHEMTEX'S HEAT TRANSFER FLUID CORROSION INHIBITOR may vary depending upon working conditions, pH and glycol-liquor or glycol-spirit ratio. Please refer your CSL representative to calculate the required dosage for your plant.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S HEAT TRANSFER FLUID CORROSION INHIBITOR is available in 35kgs HDPE carboys.

Keywords
Heat Transfer Fluid Corrosion Inhibitor, HTF Corrosion Inhibitor, Corrosion Inhibitor for Heat Transfer Fluid, Fluid System Corrosion Inhibitor






Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name