Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Heat Transfer Fluids » Inhibited Mono Ethylene Glycol » Brine System Maintenance Chemicals

Brine System Maintenance Chemicals

The Brine System Maintenance Chemicals are used as leak detector, iron removing additive, odor remover, passivation process and defoamer in brine system which is a absolute, bulk salt storage for food processing, textile dye-setting and chemical industries.

These solutions are widely needed in chemical industry, oil industry and water purifier industries. They have the ability to remove effective cleaning and removal of foulants without any restriction, retains brine or water properties and characteristics for a longer period. Our system does not form any sludge in the process, avoids leakage and minimizes maintenance cost. The products which we cater under this category are Leak Detecting Agent, Iron Removing Additive, Defoamer, Odor Remover, System Flush Out Chemical, Passivation Chemical, Online Descalant and Propylene Glycol Corrosion Inhibitor.






Leak Detecting Agent

CHEMTEX'S Leak Detecting Agent is an excellent coloring agent for food grade glycol, brine, methanol-water and industrial coolants for the purpose of leak detection can be easily detected in uv light.

Key Features and Benefits

Application and Dosage
Typical dosage concentration of CHEMTEX'S leak detecting agent is 500 gms per kl of liquid for providing achieving vibrant green color, suitable for leak detection. The concentration can be increased or decreased to get desired results.

Note:
Shake the container well before use. Replace the solution with new one if the cleaning solution becomes severely fouled and turbid.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. please refer msds for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Leak Detecting Agent is available in 5/20 Kgs HDPE jars.






Iron Removing Additive

CHEMTEX'S Iron Removing Additive is a special blend of organic polymers for seperating iron and metalfoulants from glycol/brine solutions. This unique product has been developed after intensive experiments to suit application in food grade glycol system. CHEMTEX'S iron removing additive is biodegradable and non-toxic.

Application and Dosage
CHEMTEX'S Iron Removing Additive when added to a fouled glycol solution and given the right agitation helps to settle down all iron and metal foulants. Typically the dosage concentration is derived after jar testing of the brine solution to be treated. To know the rough product dosage please refer CSL representative

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Iron Removing Additive is available in 35kgs HDPE jars.

Yes I'm Interested






Defoamer

CHEMTEX'S Defoamer is an antifoam emulsion designed to provide optimum antifoam performance combined with excellent dilution stability and foam knock down performance.

Key Features and Benefits

Application and Dosage
CHEMTEX'S Defoamer should be diluted with water prior to use to accelerate dispersion in the foaming medium. It can be diluted to any required concentration as per need. The preferred method of dilution is to add water to the emulsion and not vice versa. Avoid excessive shear while dilution. pre-process testing is recommended. Suggested starting concentration is 50 - 100ppm depending upon foaming media. Important: CHEMTEX'S Defoamer is more effective in alkaline conditions

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Defoamer is available in 35kgs HDPE jars and 200kgs hdpe barrels







Odor Remover

Chemtex's Odor Remover helps to remove odor from garbage, basement or other such fouling area. The chemical creates a masking effect on the garbage to prevent odor. This product can be applied in various area such as basements, drain covers, garbage, etc

Application and Dosage
You are requested to refer your Chemtex representative for advising you the best dosage or application method.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
Available in various pack sizes.







System Flush Out Chemical

CHEMTEX'S Flushing out chemical is a solvent based product that helps to remove moisture, dirt, dust and other soils from pipes, tubes, heat exchangers etc.

Application and Dosage
You are requested to refer your Chemtex representative for advising you the best dosage or application method.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. please refer technical data sheet, label and msds for more details and shelf life.

Packing
Available in various pack sizes.






Passivation Chemical

CHEMTEX'S Passivation Chemical is a unique passivating agent for closed loop systems. It plays a vital role in keeping the closed loop system operating efficiently. It effectively removes foulants such as dirt, solder deposits, corrosion products, water derived mineral deposits, grease, oil films or foulants etc.

Passivation With CHEMTEX'S Passivation Chemical creates a passive coating on the system metal that ensure optimum system performance, by reducing the chances of metal oxidation or corrosion(rusting), and retains the heat transfer efficiency close to design.

Key Features and Benefits

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. please refer msds for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and msds for more details and shelf life.

Packing
CHEMTEX'S Passivation Chemical is available in 25kgs HDPE wide mouth jars.






Online Descalant

CHEMTEX'S Online Descalant is designed to remove scaling and rust foulants from closed circuit system and heat exchanger during operation. It is a composition of non-aggressive and organic chemicals for removal of oxides of iron and copper, scale deposits of magnesium and calcium carbonates and silicates. The foulants are removed while system is under normal service.

Key Features and Benefits

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Online Descalant is available in the following pack size of 35/50kgs HDPE jars.






Propylene Glycol Corrosion Inhibitor

CHEMTEX'S Propylene Glycol Corrosion Inhibitor is a specially formulated chemical additive for propylene glycol to protect system metals from corrosion. It is a multi-metal corrosion inhibitor and prevents corrosion in multi-ways.

CHEMTEX'S Propylene Glycol Corrosion Inhibitor modifies metal surface by absorption and making it less susceptible to corrosion. It buffers the organic acids formed as a result of glycol oxidation and prevents further formation of acids. CHEMTEX'S Propylene Glycol Corrosion Inhibitor is compatible and fully functional in glycol-water & glycol-ethanol (rectified spirit) mixtures and improves heat transferability.

Key Features and Benefits

Application and Dosage
In new plant or normal conditions, the dosage of CHEMTEX'S propylene glycol corrosion inhibitor may vary depending upon working conditions, ph and glycol-liquor or glycol-spirit ratio. Please refer your csl representative to calculate the required dosage for your plant.

Handling Measures and Precautions
Proper human safety products such as splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer technical data sheet, label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Propylene Glycol Corrosion Inhibitor is available in 35kgs HDPE carboys.





Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name