Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Water Treatment Chemicals » Boiler Treatment Chemicals » Boiler Corrosion Inhibitor

Boiler Corrosion Inhibitor

Boiler Corrosion Inhibitor provides a general purpose treatment to the scales and corrosion in steam generating and boiler systems plants. The engineers available in Chemtex Speciality Limited provide guidance and expertised solutions to troubleshoot any problems related to boilers operation which maximises realiability of systems performance at an economical cost. It is effective in corrosion inhibition by forming a coating, specially a passivation layer which inhibits access of coorosive substance to metals. Undesirable metal oxides deposits, mineral scales, sludge are a common proble in a boiler treatment plants. The products which we cater under boiler corrosion inhibitor are condensate line corrosion inhibitor , DEHA, Morpholine, carbon dioxide corrosion inhibitor etc. Our boiler corrosion inhibition program prudently controls the system downtime, maintenance cost and expand equipment durable life span.





Condensate Line Corrosion Inhibitor

CHEMTEX'S Condensate Line Corrosion Inhibitor is a blend of filming amines with neutralizing amines of low and high vapour/liquid distribution ratio to provide protection to all stages.

CHEMTEX'S Condensate Line Corrosion Inhibitor neutralizes carbon dioxide within the condensate system and prevents corrosion due to carbonic acid formation in the initial, middle and extended areas of condensate system.

CHEMTEX'S Condensate Line Corrosion Inhibitor contains multi-functional corrosion inhibitors, designed for use in steam and complex condensate systems. It can be used up to 170 kg/cm2 or 160bar or 2400 psig pressure and temperature up to 450oC (840oF)

Key Features and Benefits
  • Prevents stress cracking corrosion due to high CO2
  • Inhibits formation of carbonic acid and thus prevents uniform corrosion
  • Compatible with other treatment chemicals
  • Returns to the feed line with the condensate return so raises the feed water pH

Application and Dosage
CHEMTEX'S Condensate Line Corrosion Inhibitor is fed neat (undiluted) continuously to the boiler feed water depending upon the carbon dioxide content of the steam at about 2ppm per CO2 ppm based on steam use. CHEMTEX'S Condensate Line Corrosion Inhibitor should be dosed to give a pH of 8.5 to 9.0 in the condensate return at all times.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Condensate Line Corrosion Inhibitor is available in the following pack size of 35/200kgs HDPE jars and barrels.







Deha - Diethyl Hydroxyl Amine

CHEMTEX'S Deha - Diethyl Hydroxyl Amine is a volatile catalyzed oxygen scavenger cum condensate line treatment chemical. It is based on DEHA catalyzed with hydroquinones. CHEMTEX'S Deha - Diethyl Hydroxyl Amine reacts with oxygen to form acetates, nitrogen and water. It passivates the metal surfaces in the boiler, and then passes out of the boiler with the steam, and act as a metal passivating agent in the return line system.

Key Features and Benefits
  • Completely organic compound
  • Volatile - Does not add TDS to blow down water
  • Metal passivator and rust converter
  • Effective condensate line treatment and pH booster
  • Non-toxic and more safe than hydrazine and carbohydrazide based chemicals
  • Compatible with other treatment chemicals
  • Returns to the feed line with the condensate return so passivates total system
  • High rate of reaction with oxygen compared with other oxygen scavengers
  • It offers a vapor-liquid distribution ratio of 1.3 and thus distributes all along the condensate circuit, ensuring a total control of corrosion

Application and Dosage
CHEMTEX'S Deha - Diethyl Hydroxyl Amine is fed neat (undiluted) continuously to the boiler feed water depending upon the dissolved oxygen content, temperature and pressure of boiler.

Theoretically the dosage is 1.3 parts active ingredient for every part of oxygen, but in application, a dosage of 3ppm active for every ppm of O2 is recommended.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Deha - Diethyl Hydroxyl Amine is available in the following pack size of 35/200kgs HDPE jars and barrels.







Polyamine

Polyamine is a blend of neutralizing amines in a ratio that best suits the conditions of a low-pressure and a medium pressure boilers with long to short run condensate line and at various pressure range and liquid vapor distribution ratio.

Polyamine is more recommended than any in-situ blend of amines. It is designed to prevent amine carbonate deposition.

Please refer to your Chemtex technical representative to share more technical details.

Key Features and Benefits
  • Condensate line treatment
  • Prevent of carbon dioxide corrosion
  • Prevents formation of carbonic acid in boiler steam system
  • Does not add to TDS of boiler water
  • Completely volatile
  • Favorable distribution ratio

Application and Dosage
Polyamine is dosed in the boiler water at the recommended dosage that is prescribed after analysis of water and other system parameters.

Please refer your CSL representative to recommend exact dosage.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
This product is available in 200kgs HDPE drums and 50kgs jars.







Morpholine

MORPHOLINE is an organic amine used for boiler water treatment. It increases the pH of boiler water to protect boiler against corrosion.

MORPHOLINE is an amine based formulation and does not add salt to the boiler water and thereby does not increase the TDS which results in reduced blow down and fuel savings.

MORPHOLINE can be used in all type, size and pressure of boilers.)

Key Features and Benefits
  • Prevents stress cracking corrosion
  • Does not add TDS
  • Reduces blow down requirement
  • Saves power
  • Compatible with other treatment chemicals
  • Returns to the feed line with the condensate return so raises the feed water pH

Application and Dosage
MORPHOLINE dosage depends upon the feed water quality and operating conditions. Ideally it should be fed continuously with dosing pumps.

For assistance on dosing concentration and method of use, please refer your CSL representative.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
MORPHOLINE is available in the following pack size of 200kgs barrels.







Cyclohexylamine

Cyclohexylamine has been primarily be used for low-pressure boilers where the condensate has a long run. The BP of 134 deg C is equivalent to a boiler pressure of 30 psi.

Cyclohexylamine has the ability to stay with condensate steam for longer runs and at various steam pressures which is not a characteristic of other neutralizing amines available. In case the amine requirement is high then there is possibility of amine carbonate deposit formation.

In this case, it is recommended that a blend of other amines be used with Cyclohexylamine for the long run and the low pressure benefits while preventing carbonate deposition.

Please refer to your CSL technical representative to offer such blends.

Key Features and Benefits
  • Condensate line treatment
  • Prevent of carbon dioxide corrosion
  • Prevents formation of carbonic acid in boiler steam system
  • Does not add to TDS of boiler water
  • Completely volatile

Application and Dosage
Cyclohexylamine is dosed in the boiler water at the recommended dosage that is prescribed after analysis of water and other system parameters.

Please refer your CSL representative to recommend exact dosage.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
This product is available in 200kgs HDPE drums and 50kgs jars.







Carbon Dioxide Corrosion Inhibitor

CHEMTEX'S Carbon Dioxide Corrosion Inhibitor is designed to prevent corrosion of boiler systems particularily the condensate return line of corrosion.

Is carbon dioxide corrosive? Yes, carbon dioxide is corrosive.

How is carbon dioxide corrosive?
Carbon dioxide is corrosive because it forms into carbonic acid in presence of CO2 + heat + water at low pH conditions. The carbonic acid that is evolved is very corrosive.

How to prevent carbon dioxide corrosion?
CO2 corrosion can simply be prevented by neutralizing amine treatment of condensate return line. This is best achieved with the use of CHEMTEX'S Polyamine. Polyamines have vapor liquid distribution ratio such that the corrosion of condensate return line is prevented even in case of long or short lines with low to medium pressure boilers and does not even cause formation of amine carbonates.

Please refer to your CSL technical representative to offer such blends.

Key Features and Benefits
  • Condensate line treatment
  • Prevent of carbon dioxide corrosion
  • Prevents formation of carbonic acid in boiler steam system
  • Does not add to TDS of boiler water
  • Completely volatile

Application and Dosage
CHEMTEX'S Carbon Dioxide Corrosion Inhibitor is dosed in the boiler water at the recommended dosage that is prescribed after analysis of water and other system parameters.

Please refer your CSL representative to recommend exact dosage.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
This product is available in 200kgs HDPE drums and 50kgs jars.







Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name