Send SMS
Product Search :

Chemtex Speciality Limited Chemtex Speciality Limited


Chemtex Speciality Limited


Home » Product Range » Water Treatment Chemicals » Waste Water Treatment Chemicals » Anionic Poly Electrolyte

Anionic Poly Electrolyte



The Anionic Poly Electrolyte is specifically designed for improvising the filtration and clarification processes in sugar process. This organic based copolymer flocculant is effective in complex systems, which coagulate the solids and instantly form flocs. We process this product is processed with higher prudency to make it applicable with any pH value range.The products which we cater under Anionic poly Electrolyte are Anionic Polyelectrolyte Powder, Polyacralamide, PAM powder, Liquid Anionic Polyelectrolyte, Effluent Treatment Flocculant.

This while colored powder is known for its matchless characteristics like improvise efficiency of clarifier, lower retention time, suitable for any pH range, reduce mud volume and compress filter cakes. This flocculant is ideally utilized in industrial waste water treatment, drinking water treatment, paper making industry and various other industries.




Anionic Polyelectrolyte Powder

CHEMTEX'S Anionic Polyelectrolyte Powder is an medium anionic charged powder polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water. It is used for effluent treatment of inorganic suspended solids found in chemical, Fishery, food, textile, dye, other effluent water, mining and coal washing waste water, metal processing, etc.

Application and Dosage
The dosage range of CHEMTEX'S Anionic Polyelectrolyte Powder varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of CHEMTEX'S Anionic Polyelectrolyte Powder.

Jar Test: Put sample of effluent in a beaker and add CHEMTEX'S Anionic Polyelectrolyte Powder as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Procedure and precautions upon dispersion and dissolving flocculants:-
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Anionic Polyelectrolyte Powder is supplied in 25kgs pack.







Polyacrylamide High Molecular Wt

CHEMTEX'S Polyacrylamide High Molecular wt. is an anionic charged solid polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water. It is used for effluent treatment of inorganic suspended solids found in beverage, breweries, chemical, fishery, food, textile, dye, other effluent water, mining and coal washing waste water, metal processing industries, etc.


Application and Dosage
The dosage range of CHEMTEX'S Polyacrylamide High Molecular wt. varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of CHEMTEX'S Polyacrylamide High Molecular wt.

Jar Test:
Put sample of effluent in a beaker and add CHEMTEX'S Polyacrylamide High Molecular wt. as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Procedure and precautions upon dispersion and dissolving flocculants:-
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Polyacrylamide High Molecular wt. is supplied in 25kgs packs.







Pam Powder

CHEMTEX'S Pam Powder is a high molecular weight polymer suitable for sugarcane juice clarification and filtration of mud slurry. CHEMTEX'S Pam Powder is especially designed for food industry with very low residual monomer of less than 0.02%.

Key Features and Benefits

Application and Dosage
Dosage :
Dosage of CHEMTEX'S Pam Powder depends upon the application normally it is in the range of 1gm to 100gm per MT of dry substrate flocculated.

METHOD FOR PREPARATION OF STOCK SOLUTION:
Gradually add 50gms of CHEMTEX'S Pam Powder solid to 100ltrs of water. Continuously stir with the help of a mechanical stirrer for approximately 30minutes.When totally dissolved, the stock solutionis ready. For maximum efficiency, stock solution of CHEMTEX'S Pam Powder should be diluted to 0.2% or less just before addition to the process. Dilute solutions of CHEMTEX'S Pam Powder are stable for a few days only.

POINT OF ADDITION & DOSAGE:
1. Just before the dorr oliver tank inlet flow.
2. In front of filter at rates between 5 and 100g/t of filter cake, the actual dose depends on the nature of mud.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Pam Powder is available in 25kgs HDPE carboys.







Liquid Anionic Polyelectrolyte

Anionic Poly Electrolyte emulsion is useful only for the reason that it is easily usable and does not require additional stirring for making stock solution.

Handling measures and precautions
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.

Packing
CHEMTEX'S Liquid Anionic Polyelectrolyte is available in 50kgs HDPE jars.







Effluent Treatment Flocculant

CHEMTEX'S Effluent Treatment Flocculant are range of polyelectrolytes of differenct molecular weights such as low molecular weight (LMW Polyelectrolyte), medium molecular weight (MMW Polyelectrolyte), high molecular weight (HMW Polyelectrolyte) and ultra high molecular weight (UHMW Polyelectrolyte) and ionic charges such as Anionic Polyelectrolyte, Cationic Polyelectrolyte, Non-Ionic Polyelectrolyte and Amphoteric Polyelectrolyte.

All these flocculants are used for secondary settling and sludge dewatering. For primary settling coagulants such as alum, PAC (poly aluminum chloride), ferric chloride, ferrous sulfate etc are used and from the organic range products like poly DADMAC, polyamine and poly DCDA are used.

The selection is based on type of application, system parameters and effluent type.










Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name