Silica Scale Removal
Chemtex Silica Scale Removal is a powder based additive for descaling solutions for silica or silicates scales removal from heat exchangers, condensers and boiler tubes. The product is inhibited with corrosion inhibitors but special care must be taken towards handling and storage of product. The product has ability to dissolve glass or glasswares.
It can be used on most common metals such as MS, SS, Cast Iron, Copper, copper alloys and aluminum but not on galvanized surfaces.
Silica Scale Remover is compatible with all range of descalent chemical.
It can be used on most common metals such as MS, SS, Cast Iron, Copper, copper alloys and aluminum but not on galvanized surfaces
| ||Specification |
|Properties ||Unit ||Typical Value |
|Form & Appearance(neat) ||- ||Powder |
|pH ||- ||Acidic |
|Specific Gravity at 20oC ||- ||1.20 +- 0.1 |
|Solubility ||- ||Easily soluble in water. || |Dosage
Silica Scale Remover is added with other descalants in the ratio of 20%-40% w/w of acidic descalant or 2-10% w/v of the total water hold up volume. The solution is then re-circulated into the heat exchanger or boiler tubes for prescribed duration. After the descaling is complete drain out the descaling solution and passivate the system to avoid flash rusting with passivation & neutralizing chemical. Major Benefits
- Silica Removal With Ease : Silica is amongst the most hard deposit and difficult to remove from heat exchanger like condenser tubes and boiler tubes. Silica Scale Remover makes silica and silicate deposit removal very easy.
- Inbuilt Corrosion Inhibition : Silica Scale Remover is inhibited for corrosion protection of system metallurgy.
- Compatibility : Silica Scale Remover is compatible with other acidic descalant compounds, which makes it easier to removal all scale deposits in one step of descaling.
Chemtex offers a wide range of corrosion inhibitors under its registered trade names of ALSTACOOL, ALSTHERM, PROTODIN, THEODIN for:-
Our Product Range